Nginx (Read: Enjin X or Engine X) is a free, open-source, high-performance HTTP server and reverse proxy, as well as an IMAP/POP3 proxy server. Igor Sysoev started development of Nginx in 2002, with the first public release in 2004. Nginx now hosts nearly 6.55% (13.5M) of all domains worldwide.
Nginx is known for its high performance, stability, rich feature set, simple configuration, and low resource consumption.
Nginx is one of a handful of servers written to address the C10K problem. Unlike traditional servers, Nginx doesn't rely on threads to handle requests. Instead it uses a much more scalable event-driven (asynchronous) architecture. This architecture uses small, but more importantly, predictable amounts of memory under load.
Even if you don't expect to handle thousands of simultaneous requests, you can still benefit from Nginx's high-performance and small memory footprint. Nginx scales in all directions: from the smallest VPS all the way up to clusters of servers.
Nginx powers several high-visibility sites, such as WordPress, Hulu, Github, Ohloh, SourceForge andTorrentReactor.
Ok Lets Begin ^_^
Update and Upgrade
Nginx is known for its high performance, stability, rich feature set, simple configuration, and low resource consumption.
Nginx is one of a handful of servers written to address the C10K problem. Unlike traditional servers, Nginx doesn't rely on threads to handle requests. Instead it uses a much more scalable event-driven (asynchronous) architecture. This architecture uses small, but more importantly, predictable amounts of memory under load.
Even if you don't expect to handle thousands of simultaneous requests, you can still benefit from Nginx's high-performance and small memory footprint. Nginx scales in all directions: from the smallest VPS all the way up to clusters of servers.
Nginx powers several high-visibility sites, such as WordPress, Hulu, Github, Ohloh, SourceForge andTorrentReactor.
Ok Lets Begin ^_^
Update and Upgrade
# yum list update
# yum –y upgrade
Install PostgreSQL and Run it
# yum install –y postgresql postgresql-server postgresql-devel
# service postgresql start
# chkconfig postgresql on
Install a need packet of installation
# yum install -y wget patch gcc libtool libmcrypt-devel libxml2-devel flex bison make pcre-devel zlib-devel openssl-devel gd-devel
Download the packet you need
# cd /usr/local/src
# wget http://dl.magnethost.asia/php/php-5.3.0.tar.gz
# wget http://dl.magnethost.asia/php/php-5.3.0-fpm-0.5.12.diff.gz
# wget http://dl.magnethost.asia/php/xcache-1.2.2.tar.gz
# wget http://dl.magnethost.asia/nginx/nginx-0.7.61.tar.gz
# wget http://dl.magnethost.asia/nginx/apps-sys-utils-start-stop-daemon-IR1_9_18-1.tar.gz
# wget http://dl.magnethost.asia/nginx/nginx-daemon
Compile and Patch PHP-FPM
# tar -zxf php-5.3.0.tar.gz
# gzip -cd php-5.3.0-fpm-0.5.12.diff.gz | patch -d php-5.3.0 –p1
# cd php-5.3.0
./configure \
--enable-fastcgi \
--enable-fpm \
--enable-cli \
--with-mcrypt \
--with-zlib \
--enable-mbstring \
--with-openssl \
--with-gd \
--with-jpeg-dir=/usr/lib64 \
--enable-gd-native-ttf \
--without-sqlite \
--disable-pdo \
--disable-reflection \
--with-libdir=lib64 \
--with-xpm-dir=/usr/lib64 \
--enable-gd-jis-conv \
--with-freetype-dir=/usr/include/freetype2 \
--with-ttf=/usr/include/freetype2 \
--enable-shared
##note: if you confuse about that option, open this link:http://wiki.nginx.org/NginxModules ##
# make all install
# strip /usr/local/bin/php-cgi
Modification a configuration of PHP-FPM at line 63 and 65:
# vi /usr/local/etc/php-fpm.conf
:63
Unix user of processes
<value name="user">nobody</value>
Unix group of processes
<value name="group">nobody</value>
Install X-Cache
#cd /usr/local/src
# tar -zxf xcache-1.2.2.tar.gz
# cd xcache-1.2.2
# phpize
# ./configure --with-php-config=/usr/local/bin/php-config --enable-xcache
# make install
Add the Module of PostgreSQL
# cd /usr/local/src/php-5.3.0/ext/pgsql/
# phpize
# ./configure
# make install
Create a Configuration for PHP
vi /usr/local/lib/php.ini
engine = On
y2k_compliance = On
magic_quotes_gpc=0
[xcache-common]
zend_extension = /usr/local/lib/php/extensions/no-debug-non-zts-20090626/xcache.so
[xcache]
xcache.shm_scheme = "mmap"
xcache.size = 64M
extension = pgsql.so
variables_order = "EGPCS"
register_argc_argv = On
auto_globals_jit = On
Make PHP-FPM Run at start up
# cd /etc/init.d/
# ln -s /usr/local/sbin/php-fpm php-fpm
# vim /etc/rc.local
## add this line to the end of rc.local##
/etc/init.d/php-fpm start
Install NginX
# cd /usr/local/src
# tar -zxf nginx-0.7.61.tar.gz
# cd nginx-0.7.61
./configure --pid-path=/usr/local/nginx/logs/nginx.pid --sbin-path=/usr/local/sbin/nginx --with-md5=/usr/lib --with-sha1=/usr/lib --with-http_ssl_module --with-http_dav_module --without-mail_pop3_module --without-mail_imap_module --without-mail_smtp_module
# make
# make install
and then install daemon for nginx
# cd /usr/local/src/
# chmod 777 nginx-daemon
# mv nginx-daemon /etc/init.d/nginx
# tar -zxf apps-sys-utils-start-stop-daemon-IR1_9_18-1.tar.gz
# cd apps/sys-utils/start-stop-daemon-IR1_9_18-1/
# gcc start-stop-daemon.c -o start-stop-daemon
# cp start-stop-daemon /usr/sbin
# chkconfig --add nginx
# chkconfig --level 345 nginx on
Configuration NginX for PHP and PHP-FPM
# vi /usr/local/nginx/conf/fastcgi_params
and add this line at end of file:
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
vi/usr/local/nginx/conf/nginx.conf
user nobody;
worker_processes 5;
error_log /var/log/nginx/error.log;
events {
worker_connections 768;
}
# mkdir /var/log/nginx
# chmod 777 /var/log/ginx
it is example for my configuration server at Politeknik Negeri Jakarta:
https://sites.google.com/site/tutorialjaringankantor/download/nginx.conf
Start NginX and PHP-FPM
# service nginx start
# /etc/init.d/php-fpm start
Test Your Server
# vim /usr/local/nginx/html/phpinfo.php
<?php
phpinfo();
?>
and open this file from web browser:
example:
http://152.118.191.5/phpinfo.php
OK Finish ^_^
+++ NCA
Source:
- Wiki NginX
- Magnet-ID
- And Many other